|
|||||||
BP5034B20资料 | |
BP5034B20 PDF Download |
|
File Size : 116 KB
Manufacturer:Rohm Description:1. Users should independently evaluate the suitability of and test each product selected for their own application. 2. This product should not be used in an application where maximum interrupt voltage or maximum interrupt current can be exceeded in a fault condition. Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame. 3. A PTC device is not a fuse - it is a nonlinear thermistor that limits current. Because under a fault condition all PTC devices go into a high resistance state but not open circuit, hazardous voltage may be present at PTC locations. 4. The devices are intended for protection against occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. 5. In most applications, power must be removed and the fault condition cleared in order to reset a PTC device. However, under certain unusual conditions, a PTC device may automatically reset (see Raychem Circuit Protection Databook). Accordingly, PTC devices should not be used in an application where an automatic reset could create a safety hazard, such as garbage disposals and blenders. 6. It is the responsibility of the user to determine the need for back up or fail safe protection to prevent damage that may occur in the event of abnormal function or failure of the PTC device. 7. Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of a PTC device. 8. Devices are not recommended for reflow soldering. 9. Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal, or mechanical procedures for electronic components. 10. PTC devices are not recommended to be installed in applications where the device is constrained such that its PTC properties are inhibited, for example in rigid potting materials or in rigid housings which lack adequate clearance to accommodate device expansion. 11. Contamination of the PTC material with certain silicone-based oils or some aggressive solvents can adversely impact the performance of the devices. |
相关型号 | |
◆ PJ-037A-SMT | |
◆ FZT591ATA | |
◆ 2-520081-2 | |
◆ 2-520103-2 | |
◆ G3VM21GR | |
◆ B40B-XADSS-N(LF)(SN) | |
◆ S301T-RO | |
◆ 172339-1 | |
◆ V7-5F17D8-336 | |
◆ 44441-2002 |
1PCS | 100PCS | 1K | 10K | ||
价 格 | |||||
型 号:BP5034B20 厂 家:Rohm 封 装: 批 号:07+ 数 量:933 说 明:原装正品 |
|||||
运 费:所有运费均有我司承担 所在地:深圳 新旧程度: |
|||||
联系人:申小姐 |
电 话:0755-83330991,0755-83047629 |
手 机:15811820920 |
QQ:2355514181 |
MSN:chipstech-int@hotmail.com |
传 真:0755-61658118 |
EMail:sales@chipstech-int.com |
公司地址: 深圳市福田区中航路鼎城国际1017 |
1. 所有我司提供的货物,均为原厂原装正品! 2. 我们的报价是不含税价格。含税需要增加相应的税点。
|