![]() |
|||||||
|
|||||||
![]() |
OPA726AID资料 | |
![]() |
OPA726AID PDF Download |
File Size : 116 KB
Manufacturer:TI Description:The LM45 can be applied easily in the same way as other integrated-circuit temperature sensors. It can be glued or ce- mented to a surface and its temperature will be within about 0.2˚C of the surface temperature. This presumes that the ambient air temperature is almost the same as the surface temperature; if the air temperature were much higher or lower than the surface temperature, the ac- tual temperature of the LM45 die would be at an intermediate temperature between the surface temperature and the air temperature. To ensure good thermal conductivity the backside of the LM45 die is directly attached to the GND pin. The lands and traces to the LM45 will, of course, be part of the printed cir- cuit board, which is the object whose temperature is being measured. These printed circuit board lands and traces will not cause the LM45s temperature to deviate from the de- sired temperature. Alternatively, the LM45 can be mounted inside a sealed-end metal tube, and can then be dipped into a bath or screwed into a threaded hole in a tank. As with any IC, the LM45 and accompanying wiring and circuits must be kept insulated and dry, to avoid leakage and corrosion. This is especially true if the circuit may operate at cold temperatures where conden- sation can occur. Printed-circuit coatings and varnishes such |
相关型号 | |
◆ PJ-037A-SMT | |
◆ FZT591ATA | |
◆ 2-520081-2 | |
◆ 2-520103-2 | |
◆ G3VM21GR | |
◆ B40B-XADSS-N(LF)(SN) | |
◆ S301T-RO | |
◆ 172339-1 | |
◆ V7-5F17D8-336 | |
◆ 44441-2002 |
1PCS | 100PCS | 1K | 10K | ||
价 格 | |||||
型 号:OPA726AID 厂 家:TI 封 装: 批 号:07+ 数 量:4265 说 明:原装正品 |
|||||
运 费:所有运费均有我司承担 所在地:深圳 新旧程度: |
|||||
联系人:申小姐 |
电 话:0755-83330991,0755-83047629 |
手 机:15811820920 |
QQ:2355514181 |
MSN:chipstech-int@hotmail.com |
传 真:0755-61658118 |
EMail:sales@chipstech-int.com |
公司地址: 深圳市福田区中航路鼎城国际1017 |
1. 所有我司提供的货物,均为原厂原装正品! 2. 我们的报价是不含税价格。含税需要增加相应的税点。
|