 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| PCM1794ADBR资料 | |
|
PCM1794ADBR PDF Download |
|
File Size : 116 KB
Manufacturer:TI Description:All voltages are referenced to ground. STBY specified for VCC equal to 3.0V and 5.0V while control port logic pins are driven to VCC or GND. Absolute linearity is used to determine wiper voltage versus expected voltage as determined by wiper position. Relative linearity is used to determine the change of wiper voltage between two adjacent wiper positions. The INC low to CS inactive time is the transition time that allows the three control pins to become inactive without writing the wiper position to the EEPROM. Wiper storage time is the time required for the wiper position to be written to the EEPROM. During this time, the three-ter- minal interface is inactive. Wiper load time is specified as the time required to load the wiper position stored in EEPROM once VCC has reached a stable operating voltage greater than or equal to VCC MIN. Power-up time is specified as the time required before the three control pins become active once a stable power supply level of at least VCC MIN has been reached. The maximum number of EEPROM write cycles is guaranteed by design and is not tested in production. |
|
| 相关型号 | |
| ◆ PJ-037A-SMT | |
| ◆ FZT591ATA | |
| ◆ 2-520081-2 | |
| ◆ 2-520103-2 | |
| ◆ G3VM21GR | |
| ◆ B40B-XADSS-N(LF)(SN) | |
| ◆ S301T-RO | |
| ◆ 172339-1 | |
| ◆ V7-5F17D8-336 | |
| ◆ 44441-2002 | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：PCM1794ADBR 厂 家：TI 封 装： 批 号：07+ 数 量：8642 说 明：原装正品 |
|||||
|
运 费：所有运费均有我司承担 所在地：深圳 新旧程度： |
|||||
| 联系人：申小姐 |
| 电 话：0755-83330991,0755-83047629 |
| 手 机：15811820920 |
| QQ：2355514181 |
| MSN：chipstech-int@hotmail.com |
| 传 真：0755-61658118 |
| EMail：sales@chipstech-int.com |
| 公司地址： 深圳市福田区中航路鼎城国际1017 |
|
1. 所有我司提供的货物，均为原厂原装正品！ 2. 我们的报价是不含税价格。含税需要增加相应的税点。
|
