首页 > 推广型号列表 > SN65HVD35DR

SN65HVD35DR

SN65HVD35DR资料
	SN65HVD35DR PDF Download

File Size : 116 KB Manufacturer:TI Description: PIN DESCRIPTION This pin provides shutdown for all the regulators. A TTL compatible, logic level high applied to this pin disables all the outputs and discharges the soft-start capacitor. The SD signal turns off the synchronous allowing the body diode to conduct and discharge the output capacitor. This pin provides the feedback for the AGP linear regulator. The Select pin when con- nected to the "Type Detect" pin of the AGP slot automatically selects the right voltage for the AGP VDDQ. This pin provides automatic voltage selection for the AGP switching regulator. When it is pulled LO, the voltage is 1.5V and when left open or pulled to HI, the voltage is 3.3V. This pin provides the soft-start for all the regulators. An internal current source charges an external capacitor that is connected from this pin to ground which ramps up the outputs of the regulators, preventing the outputs from overshooting as well as limiting the input cur- rent. The second function of the Soft-Start cap is to provide long off time (HICCUP) for the synchronous MOSFET during current limiting. This pin has dual function. It acts as an output of the over-voltage protection circuitry or it can be used to program the frequency using an external resistor . When used as a fault detector, if any of the switcher outputs exceed the OVP trip point, the Fault pin switches to 12V and the soft-start cap is discharged. If the Fault pin is to be connected to any external circuitry, it needs to be buffered. This pin provides the feedback for the linear regulator that its output drive is Drive4. This pin controls the gate of an external MOSFET for the 1.8V chip set linear regulator. This pin has no connection. This pin serves as the ground pin and must be connected directly to the ground plane. This pin controls the gate of an external transistor for the 1.5V GTL+ linear regulator. This pin provides the feedback for the linear regulator that its output drive is Drive3. 5V supply voltage. A high frequency capacitor (0.1 to 1mF) must be placed close to this pin and connected from this pin to the ground plane for noise free operation. This pin provides the feedback for the synchronous switching regulator. Typically this pin can be connected directly to the output of the switching regulator. However, a resistor divider is recommended to be connected from this pin to VOUT1 and ground to adjust the output voltage for any drop in the output voltage that is caused by the trace resistance. The value of the resistor connected from VOUT1 to Fb1 must be less than 1000V. This pin is internally connected to the under-voltage and over-voltage comparators sens- ing the Vcore status. It must be connected directly to the Vcore supply. This pin is connected to the Drain of the power MOSFET of the Core supply and it provides the positive sensing for the internal current sensing circuitry. An external resistor pro- grams the current sense threshold depending on the R of the power MOSFET. AnDS external capacitor is placed in parallel with the programming resistor to provide high fre- quency noise filtering. This pin serves as the Power ground pin and must be connected directly to the ground plane close to the source of the synchronous MOSFET. A high frequency capacitor (typi- cally 1mF) must be connected from V12 pin to this pin for noise free operation. Output driver for the synchronous power MOSFET for the Core supply. This pin is connected to the Source of the power MOSFET for the Core supply and it provides the negative sensing for the internal current sensing circuitry. Output driver for the high side power MOSFET for the Core supply. This pin is connected to the 12V supply and serves as the power Vcc pin for the output drivers. A high frequency capacitor (typically 1mF) must be placed close to this pin and PGnd pin and be connected directly from this pin to the ground plane for the noise free operation.


相关型号
◆ PJ-037A-SMT
◆ FZT591ATA
◆ 2-520081-2
◆ 2-520103-2
◆ G3VM21GR
◆ B40B-XADSS-N(LF)(SN)
◆ S301T-RO
◆ 172339-1
◆ V7-5F17D8-336
◆ 44441-2002

	1PCS	100PCS	1K	10K
价格


型号：SN65HVD35DR 厂家：TI 封装：批号：07+ 数量：6655 说明：原装正品


运费：所有运费均有我司承担所在地：深圳新旧程度：