|
|||||||
SW001A2B91Z资料 | |
SW001A2B91Z PDF Download |
|
File Size : 116 KB
Manufacturer:TYCO Description:NOTES: 1.Dimensions are in inches. 2.Metric equivalents are given for general information only. 3.Collector shall be electrically connected to the case. This terminal may be flattened and pierced only when the 90 option is used. 4.SD is the outer diameter of coated threads. Reference: Screw thread standards for Federal Service Handbook H28, part I. 5.The orientation of the terminals in relation to the hex flats is not controlled. 6.All three terminals. 7.The case temperature may be measured anywhere on the seating plane within 0.125 (3.18 mm) of the stud. 8.Terminal spacing measured at the base seat only. 9.Dimensions e, e1, PS1, and PS are measured from the center line of terminals. 10.Maximum unthreaded dimension. 11.This dimension applies to the location of the center line of the terminals. 12.A 90 angle lead orientation as shown may be used at the option of the manufacturer. All dimensions of the basic outline except e, e1, and the 120 lead angle apply to this option. 13.Terminal -1, Emitter; Terminal -2, Base; Terminal -3, Collector. 14.A slight chamfer or undercut on one or both ends of the hexagonal is optional. |
相关型号 | |
◆ PJ-037A-SMT | |
◆ FZT591ATA | |
◆ 2-520081-2 | |
◆ 2-520103-2 | |
◆ G3VM21GR | |
◆ B40B-XADSS-N(LF)(SN) | |
◆ S301T-RO | |
◆ 172339-1 | |
◆ V7-5F17D8-336 | |
◆ 44441-2002 |
1PCS | 100PCS | 1K | 10K | ||
价 格 | |||||
型 号:SW001A2B91Z 厂 家:TYCO 封 装: 批 号:07+ 数 量:6842 说 明:原装正品 |
|||||
运 费:所有运费均有我司承担 所在地:深圳 新旧程度: |
|||||
联系人:申小姐 |
电 话:0755-83330991,0755-83047629 |
手 机:15811820920 |
QQ:2355514181 |
MSN:chipstech-int@hotmail.com |
传 真:0755-61658118 |
EMail:sales@chipstech-int.com |
公司地址: 深圳市福田区中航路鼎城国际1017 |
1. 所有我司提供的货物,均为原厂原装正品! 2. 我们的报价是不含税价格。含税需要增加相应的税点。
|