![]() |
|||||||
|
|||||||
![]() |
TL3474ACN资料 | |
![]() |
TL3474ACN PDF Download |
File Size : 116 KB
Manufacturer:TI Description:Notes: (1) See SOA curves or consult factory for appropriate derating. (2) The set-point voltage tolerance is affected by the tolerance and stability ofRSET. The stated limit is unconditionally met if RSET has a tolerance of 1 % with 100 ppm/C or better temperature stability. (3) The Inhibit control (pin 3) has an internal pull-up to Vin, and if left open-circuit the module will operate when input power is applied. A small low- leakage (<100 nA) MOSFET is recommended to control this input. See application notes for more information. (4) The regulator requires a minimum of 100 µF input capacitor with a minimum 300 mArms ripple current rating. For further information, consult the related application note on Capacitor Recommendations. (5) An external output capacitor is not required for basic operation. Adding 100 µF of distributed capacitance at the load will improve the transient response. (6) This is the calculated maximum. The minimum ESR limitation will often result in a lower value. Consult the application notes for further guidance. (7) This is the typical ESR for all the electrolytic (non-ceramic) output capacitance. Use 7 mΩ as the minimum when using max-ESR values to calculate. |
相关型号 | |
◆ PJ-037A-SMT | |
◆ FZT591ATA | |
◆ 2-520081-2 | |
◆ 2-520103-2 | |
◆ G3VM21GR | |
◆ B40B-XADSS-N(LF)(SN) | |
◆ S301T-RO | |
◆ 172339-1 | |
◆ V7-5F17D8-336 | |
◆ 44441-2002 |
1PCS | 100PCS | 1K | 10K | ||
价 格 | |||||
型 号:TL3474ACN 厂 家:TI 封 装: 批 号:07+ 数 量:36755 说 明:原装正品 |
|||||
运 费:所有运费均有我司承担 所在地:深圳 新旧程度: |
|||||
联系人:申小姐 |
电 话:0755-83330991,0755-83047629 |
手 机:15811820920 |
QQ:2355514181 |
MSN:chipstech-int@hotmail.com |
传 真:0755-61658118 |
EMail:sales@chipstech-int.com |
公司地址: 深圳市福田区中航路鼎城国际1017 |
1. 所有我司提供的货物,均为原厂原装正品! 2. 我们的报价是不含税价格。含税需要增加相应的税点。
|