 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| TLC252BCP资料 | |
|
TLC252BCP PDF Download |
|
File Size : 116 KB
Manufacturer:TI Description: This is the inverting power amplifier output, which is used to provide a feedback signal to the PI pin to set the gain of the pushCpull power amplifier outputs. This pin is capable of driving a 300 Ω load to PO+. The PO+ and POC outputs are differential (pushCpull) and capable of driving a 300 Ω load to 1.772 V peak, which is 3.544 V peakCtoCpeak. The bias volt- age and signal reference of this output is the VAG pin. The VAG pin cannot source or sink as much current as this pin, and therefore low impedance loads must be between PO+ and POC. The PO+ and POC differential drivers are also ca- pable of driving a 100 Ω resistive load or a 100 nF Piezoelec- tric transducer in series with a 20 Ω resister with a small increase in distortion. These drivers may be used to drive re- sistive loads of 32 Ω when the gain of POC is set to 1/4 or less. Connecting PI to VDD will power down the power driver amplifiers and the PO+ and POC outputs will be high imped- ance. This pin is also high impedance when the device is powered down by the PDI pin. |
|
| 相关型号 | |
| ◆ PJ-037A-SMT | |
| ◆ FZT591ATA | |
| ◆ 2-520081-2 | |
| ◆ 2-520103-2 | |
| ◆ G3VM21GR | |
| ◆ B40B-XADSS-N(LF)(SN) | |
| ◆ S301T-RO | |
| ◆ 172339-1 | |
| ◆ V7-5F17D8-336 | |
| ◆ 44441-2002 | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：TLC252BCP 厂 家：TI 封 装： 批 号：07+ 数 量：36520 说 明：原装正品 |
|||||
|
运 费：所有运费均有我司承担 所在地：深圳 新旧程度： |
|||||
| 联系人：申小姐 |
| 电 话：0755-83330991,0755-83047629 |
| 手 机：15811820920 |
| QQ：2355514181 |
| MSN：chipstech-int@hotmail.com |
| 传 真：0755-61658118 |
| EMail：sales@chipstech-int.com |
| 公司地址： 深圳市福田区中航路鼎城国际1017 |
|
1. 所有我司提供的货物，均为原厂原装正品！ 2. 我们的报价是不含税价格。含税需要增加相应的税点。
|
建议使用分辨率:1024*768