 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| TLV3012AIDCKT资料 | |
|
TLV3012AIDCKT PDF Download |
|
File Size : 116 KB
Manufacturer:TI Description:(1) Lead Forming When forming leads, the leads should be bent at a point at least 3mm from the base of the epoxy bulb. Do not use the base of the leadframe as a fulcrum during lead forming. Lead forming should be done before soldering. Do not apply any bending stress to the base of the lead. The stress to the base may damage the LEDs characteristics or it may break the LEDs. When mounting the LEDs onto a printed circuit board, the holes on the circuit board should be exactly aligned with the leads of the LEDs. If the LEDs are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the LEDs. |
|
| 相关型号 | |
| ◆ PJ-037A-SMT | |
| ◆ FZT591ATA | |
| ◆ 2-520081-2 | |
| ◆ 2-520103-2 | |
| ◆ G3VM21GR | |
| ◆ B40B-XADSS-N(LF)(SN) | |
| ◆ S301T-RO | |
| ◆ 172339-1 | |
| ◆ V7-5F17D8-336 | |
| ◆ 44441-2002 | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：TLV3012AIDCKT 厂 家：TI 封 装： 批 号：07+ 数 量：29576 说 明：原装正品 |
|||||
|
运 费：所有运费均有我司承担 所在地：深圳 新旧程度： |
|||||
| 联系人：申小姐 |
| 电 话：0755-83330991,0755-83047629 |
| 手 机：15811820920 |
| QQ：2355514181 |
| MSN：chipstech-int@hotmail.com |
| 传 真：0755-61658118 |
| EMail：sales@chipstech-int.com |
| 公司地址： 深圳市福田区中航路鼎城国际1017 |
|
1. 所有我司提供的货物，均为原厂原装正品！ 2. 我们的报价是不含税价格。含税需要增加相应的税点。
|
建议使用分辨率:1024*768